Propane Tank Installation Cost (2026)

The propane tank installation cost in 2026 typically ranges from $1,000 to $5,500 for an above-ground tank, and $3,000 to $10,000 for an underground tank, including the tank, the gas line to the house, permits, and the first fill. A small 120-gallon above-ground tank is the cheapest option at $1,000 to $2,000 installed, while a 1,000-gallon underground tank for whole-home heating can reach $10,000 or more. Whether you lease or buy the tank, the size of your home, and how far the tank sits from the house are the biggest factors in the final price.

Key takeaway: Budget $1,000 to $5,500 for an above-ground propane tank installation and $3,000 to $10,000 for an underground installation in 2026. Leasing the tank from a propane supplier often cuts the upfront cost to $500 to $1,500, but buying the tank gives you the freedom to shop around for the lowest propane price.

Average Propane Tank Installation Cost

For a typical American home, a mid-size propane tank installation costs about $2,500 to $4,000 all in. That figure covers the tank itself, trenching or running the gas line to the house, the regulator and fittings, the permit, and the inspection. The first fill of propane is usually billed separately and costs $300 to $1,500 depending on tank size and the local price per gallon.

Costs vary widely by region and by site conditions. A flat yard with easy access and a short gas line run will land at the low end. A long run across a sloped or rocky yard, or a tank that needs a concrete pad and a long trench, pushes the price up. Labor rates also matter: licensed gas fitters charge $75 to $150 per hour in most of the United States, and a typical installation takes one to two days. The table below shows national average totals for the most common installations in 2026.

Installation TypeTank CostInstallation LaborTotal Installed
120-gallon, above-ground$400 - $800$500 - $1,200$1,000 - $2,000
250-gallon, above-ground$800 - $1,500$600 - $1,400$1,500 - $2,900
500-gallon, above-ground$1,500 - $2,500$800 - $1,800$2,500 - $4,500
500-gallon, underground$2,000 - $3,500$1,500 - $3,000$3,500 - $6,500
1,000-gallon, above-ground$2,500 - $4,500$1,000 - $2,500$4,000 - $7,000
1,000-gallon, underground$3,500 - $5,500$2,500 - $4,500$6,000 - $10,000

These totals assume a standard installation with no major surprises. If the installer finds rock during trenching, or if the gas line needs to run under a driveway, expect the labor portion to rise. Always get at least two written quotes from licensed installers, and confirm each quote includes the permit, the pressure test, and the inspection. For the cost of running the gas line itself, see our gas line installation cost guide.

Propane Tank Prices by Size

Propane tanks are measured in gallons of water capacity, and the usable propane is about 80 percent of that number, since tanks are only filled to 80 percent for safety. A 120-gallon tank holds about 96 gallons of usable propane and suits a small cabin, a single appliance, or a home that uses propane only for cooking and a water heater. These tanks cost $400 to $800 to buy and are the easiest to install, often sitting on a simple gravel or concrete pad near the house.

A 250-gallon tank holds about 200 gallons of usable propane and works well for a small to mid-size home with a furnace and a water heater. Tank prices run $800 to $1,500. The 500-gallon tank is the most common size for a full-size American home, holding about 400 usable gallons, enough to heat a 2,000 to 3,000 square foot house through a winter in most climates. These cost $1,500 to $2,500 above ground and $2,000 to $3,500 for an underground model with a protective coating.

A 1,000-gallon tank holds about 800 usable gallons and is the right choice for a large home, a home with multiple propane appliances, or a property in a cold climate with a long heating season. Prices run $2,500 to $4,500 above ground and $3,500 to $5,500 underground. Bigger tanks mean fewer deliveries and a lower price per gallon, since suppliers often charge less per gallon on larger fills, but they also need more yard space and a bigger excavation if buried.

Above-Ground vs. Underground Installation

An above-ground tank is cheaper, faster to install, and easier to inspect and service. The tank sits on a concrete pad or compacted gravel, and the installer connects it to the house with a buried or surface gas line. Above-ground tanks are visible, which some homeowners dislike, but they can be screened with fencing or shrubs as long as access for deliveries and inspections is kept clear. Most above-ground installations are finished in a single day.

An underground tank costs $1,500 to $4,000 more than the same size above-ground tank, because the installer must excavate a hole, set the tank on a bed of sand, backfill carefully, and restore the yard. Underground tanks are invisible, protect the yard appearance, and are less exposed to weather and temperature swings. They also free up yard space. The tradeoffs are a longer installation, usually two days, harder access for inspection and maintenance, and a risk of corrosion if the protective coating is damaged or the soil stays wet. Underground tanks need a cathodic protection system, a small sacrificial anode that prevents rust, and that anode should be tested every few years.

Local rules also affect the choice. Some homeowners associations and municipalities restrict above-ground tanks, and some areas require underground tanks for larger sizes. Check your local code and your HOA rules before you decide. Setback rules apply either way: most codes require the tank to sit at least 10 feet from the house, 10 feet from property lines, and 25 feet from any ignition source for larger tanks, though exact distances vary by tank size and local code.

Permits, Inspections, and Site Prep

Almost every propane tank installation requires a permit, and the permit alone costs $50 to $300 depending on your city or county. Your installer usually handles the permit application, but confirm that in the quote. The permit process includes a site plan showing the tank location, setback distances, and the gas line route. Some jurisdictions also require a fire marshal review for tanks over 500 gallons.

Site preparation is part of the installation cost and includes clearing the area, digging the trench for the gas line, and preparing the pad or excavation. A concrete pad for an above-ground tank costs $200 to $500. Trenching costs $10 to $25 per linear foot depending on soil and depth, and most codes require the gas line to be buried 12 to 18 inches deep. After installation, the system must pass a pressure test and an inspection before the tank can be filled. The inspector checks the regulator, the fittings, the shut-off valve, and the leak test results. Never let a tank be filled before the inspection passes. Our guide to gas line permit requirements explains the paperwork in more detail.

Leasing vs. Buying a Propane Tank

One of the biggest decisions is whether to lease the tank from a propane supplier or buy it outright. Leasing is the cheaper way in: the supplier installs their tank for a low upfront cost, often $500 to $1,500 including installation, and charges a yearly rental fee of $50 to $200. The supplier owns the tank and handles its maintenance and any required inspections. The catch is that you must buy your propane from that supplier, at whatever price they set, for as long as you lease the tank.

Buying the tank costs more upfront, $1,000 to $5,500 installed depending on size, but you own the equipment and can buy propane from any supplier. That freedom lets you shop around for the lowest per-gallon price, which can save $0.30 to $1.00 per gallon. For a home that uses 800 gallons a year, that is $240 to $800 in annual savings, so a purchased tank often pays for itself in three to five years. You are also responsible for the tank maintenance, inspections, and eventual replacement, though a well-maintained steel tank lasts 30 to 40 years.

The right choice depends on how long you plan to stay in the home and how much propane you use. If you use little propane and may move in a few years, leasing is simpler. If you heat with propane and plan to stay, buying usually saves money over time. Before signing a lease, read the terms carefully: some leases include minimum annual usage requirements and early termination fees of $200 to $500. For a cost comparison of propane versus natural gas heating, see our guide on natural gas vs propane cost.

First Fill and Ongoing Costs

The first fill is billed separately from installation and is one of the biggest single costs of the project. Propane prices in 2026 average about $2.50 to $3.50 per gallon in most of the United States, with higher prices in the Northeast and remote areas. A first fill for a 500-gallon tank, about 400 usable gallons, costs roughly $1,000 to $1,400. A 1,000-gallon tank first fill runs $2,000 to $2,800. Some suppliers offer a discounted first fill as part of a new-customer deal, so ask about it when you get quotes.

Ongoing costs include the propane itself, plus delivery fees and any tank rental if you lease. A typical home that heats with propane uses 500 to 1,000 gallons per year, costing $1,250 to $3,500 annually at current prices. Homes that use propane only for cooking and water heating use far less, often 100 to 300 gallons a year. Many suppliers offer budget plans that spread the cost across monthly payments, and automatic delivery programs that top up your tank before it runs low. A propane monitor, a gauge that reports the tank level to your phone, costs $100 to $200 and helps you avoid running out in the middle of a cold snap.

How to Choose the Right Tank Size

Choosing the right size starts with what the propane will power. A home that uses propane only for a stove and a water heater can get by with a 120 or 250-gallon tank. Add a furnace, and a 500-gallon tank becomes the standard choice. Add a propane clothes dryer, fireplace, pool heater, or standby generator, and a 1,000-gallon tank is usually the better fit. Your installer can calculate your expected annual usage from the BTU ratings of your appliances and your local climate.

Climate matters as much as appliance count. A home in Minnesota uses far more propane for heating than the same home in Georgia, and a larger tank means fewer winter deliveries on icy roads. As a rule of thumb, size the tank so you need no more than two to three fills per year. Fewer fills mean a lower price per gallon and less hassle, but an oversized tank wastes money upfront and takes up yard space. If you are unsure, ask two suppliers to estimate your usage independently and compare their recommendations. A reputable installer will size the tank to your actual load, not to the largest tank they sell.

Frequently Asked Questions

Propane tank questions usually come down to cost, the lease versus buy decision, and how long the process takes. The answers below cover the most common ones. A licensed propane installer can confirm the exact requirements for your property, including setbacks and permits. For help with a gas line or propane installation, call (877) 762-1902.

Frequently Asked Questions

How much does it cost to install a propane tank?
Propane tank installation costs $1,000 to $5,500 for an above-ground tank and $3,000 to $10,000 for an underground tank in 2026, including the tank, gas line, permit, and inspection. The first fill of propane is usually billed separately.
Is it cheaper to lease or buy a propane tank?
Leasing costs less upfront, usually $500 to $1,500 installed, but you must buy propane from that supplier. Buying costs $1,000 to $5,500 but lets you shop for the lowest propane price, often saving $240 to $800 per year for a home that heats with propane.
How long does a propane tank installation take?
An above-ground tank installation usually takes one day. An underground tank takes one to two days because of excavation. Permit approval can add a few days to a few weeks before work starts.
Do I need a permit to install a propane tank?
Yes, almost all propane tank installations require a permit, which costs $50 to $300. The installation must also pass a pressure test and inspection before the tank can be filled.
How far must a propane tank be from the house?
Most codes require at least 10 feet from the house and 10 feet from property lines, with larger tanks requiring 25 feet from ignition sources. Exact setbacks vary by tank size and local code.
How long does a propane tank last?
A well-maintained steel propane tank lasts 30 to 40 years. Underground tanks need cathodic protection to prevent corrosion, and the anode should be tested every few years.
AP
ABS Pipes Editorial Team
Our guides are researched from plumbing codes, manufacturer specs and licensed-plumber interviews, then reviewed for accuracy before publishing. Prices are re-verified periodically — see the "last verified" note on cost guides.
Disclaimer: This content is for informational purposes only and is not licensed plumbing advice. Plumbing work can involve water damage, gas lines and code violations — when in doubt, hire a licensed plumber in your area.