Gas Line for Stove: Installation Cost
Switching to a gas range or moving your stove to a new spot in the kitchen means running a gas line, and the gas line for stove cost is the first number most homeowners want. In 2026, installing a gas line for a stove typically costs $400 to $1,000 when a gas main is already nearby, with a national average of about $700. If the stove sits far from the existing line, or no gas line exists in the kitchen at all, the job can run $1,000 to $1,500 or more.
Average Cost to Run a Gas Line for a Stove
For a typical kitchen, running a new gas line to a stove costs $400 to $1,000. That range covers a run of up to about 30 feet through an accessible basement or crawl space, using black steel pipe or CSST, plus a shutoff valve and a flexible appliance connector. Jobs at the low end involve a short, straight run with open access. Jobs at the high end involve longer runs, finished ceilings that must be opened, or routing through multiple rooms.
If your home has no natural gas service at all, the project is bigger: the gas utility must bring a service line to the house and set a meter, which can add $500 to $2,000 or more depending on the utility and the distance from the street. In that case, get the utility quote first, because it determines whether the whole project makes financial sense.
New Line vs Simple Hookup
There is a big price difference between a new line and a simple hookup. If a capped gas stub already exists behind the stove location, the installer only needs to add a shutoff valve, connect a flexible gas connector, test for leaks, and light the range. That hookup-only job usually costs $150 to $350, including the connector and testing.
A brand-new line is a larger job: the installer sizes the pipe for the range BTU load, runs pipe from the nearest manifold or main, adds a dedicated shutoff valve, and pressure-tests the new section. That is the $400 to $1,000 job most homeowners face. If the kitchen is being remodeled and walls are already open, the cost drops, since access labor is the most expensive part of many gas jobs. Schedule the gas work while the walls are open whenever possible.
Cost by Distance From the Main Line
| Distance to Stove | Typical Cost | Notes |
|---|---|---|
| Hookup only (line exists) | $150 - $350 | Valve, connector, leak test |
| Under 15 feet | $400 - $650 | Short run, open access |
| 15 - 30 feet | $650 - $1,000 | Most common kitchen scenario |
| 30 - 50 feet | $1,000 - $1,500 | Long run, possible wall repair |
| Over 50 feet | $1,500+ | May need larger pipe sizing |
Distance is not the only factor. A 20-foot run through an open basement ceiling is cheaper than a 10-foot run through a finished ceiling and tiled wall. The route matters as much as the length, so a site visit produces a far more accurate quote than a phone estimate.
What Is Included in the Price
A proper quote for a stove gas line should include the pipe and fittings, a dedicated shutoff valve within reach of the range, a flexible appliance connector rated for the range, a sediment trap where code requires it, and a pressure test with leak check. Permit fees are sometimes included and sometimes billed separately, so confirm this in writing. Patching drywall, repainting, and repairing flooring are often excluded, so ask whether the contractor handles restoration or leaves it to you.
Also confirm the pipe sizing. A standard residential range draws roughly 40,000 to 65,000 BTU, and a range with a large oven and six burners can draw more. The installer must size the new branch so the range gets full pressure even when the furnace, water heater, and other appliances run at the same time. Undersized pipe shows up as weak burners and slow preheating, and fixing it later costs more than sizing it right the first time.
Permits, Testing, and Safety
Gas line work for a stove requires a permit in most jurisdictions, and the finished line must pass a pressure test and inspection before use. Permit fees generally run $50 to $300. The installer should pull the permit, perform the test, and be present for inspection. After the range is connected, the installer should leak-test every joint with a detector or soap solution and confirm the burners ignite cleanly with steady blue flames.
Safety basics matter once the range is in use. Keep the shutoff valve accessible, never use the flexible connector as a substitute for hard pipe, and install a carbon monoxide detector in or near the kitchen if you do not already have one. If you ever smell gas, leave the house, avoid flipping switches, and call your gas utility emergency line from outside.
Gas vs Electric: Is Switching Worth It
Many homeowners ask whether the $400 to $1,000 line cost is worth it to switch from electric to gas. Gas ranges offer instant heat control, work during power outages (for models with manual ignition), and often cost less to run per meal than electric resistance ranges, depending on local gas and electricity rates. The payback on fuel savings alone can take several years, so most people switch for cooking performance rather than savings.
Consider the full cost: the gas line, a possible 120-volt outlet for the range igniter and clock, and any cabinet or countertop changes if the new range differs in size. If you are also planning other gas appliances, such as a gas dryer or fireplace, running a larger main or additional branches in the same visit spreads the labor cost across projects. See our guides on gas line extension cost and gas line pressure test cost for related pricing.
How to Keep the Cost Down
One more cost factor worth checking is the condition of the gas system behind the walls. If the existing piping is older galvanized steel with visible corrosion, or if the home still uses an outdated connector style, the installer may recommend replacing a short section while the work is already open. This adds cost upfront but avoids a second visit and a second permit later. Similarly, if your range requires a dedicated shutoff valve that is easy to reach, placing it in an adjacent cabinet rather than behind the appliance itself makes future service faster and cheaper. Ask your installer to walk the route with you before quoting, so the estimate reflects the real path rather than a guess from the floor plan.
Get three written quotes and compare the scope, not just the total. Ask each installer to list pipe length, material, permit fees, and whether wall repair is included. If a remodel is planned, schedule the gas work while walls are open. Keep the stove location as close to the existing gas main as your kitchen layout allows, since every extra foot adds pipe and labor. Bundling the stove line with another gas project in the same visit can save a second trip charge.
Do not cut corners on licensing or testing to save money. An unlicensed, unpermitted gas line can void insurance coverage and create serious safety risks. The cheapest safe option is a licensed installer with a clear written quote, not the lowest bidder who skips the permit.
Questions to Ask Your Installer
Before hiring, ask whether the quote includes the permit, pressure test, and inspection; what pipe material will be used and why; how the pipe will be sized for the range BTU load; whether wall or floor repair is included; and how long the job will take. Confirm the installer license and insurance, and ask for the final price in writing with the scope itemized.
For related outdoor and utility projects, see our guides on gas line for a fire pit and gas meter relocation, or browse the full set from the gas lines hub. Ready to get a quote for your stove line? Call (877) 762-1902.